The usage of Bricks or Pavers to develop a sidewalk or patio area matches a home in a way that is unmatched. In addition, setting up a Brick or Paver sidewalk does not necessarily need a pro.
The secret to setting up a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be installed. The area should be dug out a minimum of a foot down, eliminating all topsoil and clay soil. In addition, string lines ought to be strung on each side of the walkway. The string lines show the ended up height of the pathway.
Once the area has been dug down, 3/4" gravel stone should be laid in and tamped down tightly. The height between the tamped down sand and the stringline ought to equate to the thickness of the brick or paver.
Now that you have a steady base, place a 1" pipe or ledger board the length of the sidewalk on either side of the pathway. Then using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.
Now put on the level sand/stone dust strips of plastic website brick borders. Set up a run on both sides of the prepared area. These strips will function as your pathway border and aid to preserve the integrity and shape of the pathway. You can get these plastic strip borders at most home enhancement stores. The strips should be anchored down with 12" galvinized nails. You should sink these nails into the ground and through the strips every foot.
The secret to laying the bricks/pavers is to make sure that they interlock with each other. Constantly stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again help preserve the integrity of the walkway.
Undoubtedly bricks/pavers will require to be cut or divided when building the walkway. To in fact cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the area where you want to break the brick. If your pathway has curves you will need to buy/rent a wetsaw.
After setting up the bricks, develop the outdoors edges with extra sand, and then shovel in the topsoil and load down securely.
Spread stone dust over the new sidewalk and sweep into the fractures. This will finish the interlocking of the bricks and help to eliminate any weed growth.
In addition, installing a Brick or Paver walkway does not necessarily require a pro. The key to installing a Brick or Paver Walkway is to first correctly prepare the location where the bricks/pavers are to be installed. Now that you have a steady base, position a 1" pipe or journal board the length of the sidewalk on either side of the pathway. These strips will act as your walkway border and assistance to preserve the stability and shape of the pathway. Inevitably bricks/pavers will require to be cut or divided when building the sidewalk.